© Petzl Distribution - Vuedici
How to properly adjust your AVAO harness?
Video – How to Stow Your GRILLON Lanyard
Work positioning and ASAP
Function test each time the ASAP or ASAP LOCK is installed
Fall arrest with ASAP and ASAP LOCK
Video – How to Unlock a Blocked ASAP
Video – How to Pack Your Rope in a BUCKET Bag
Video – How to Perform A PPE Inspection of Your Rope
Video – How to Tie and Equalize a Bunny Knot
Video – Attaching a Headlamp to Your Helmet with SLOT ADAPT
Which harness for which uses?
How to choose between ASAP’SORBER 20 and ASAP’SORBER 40
Releasable anchor with the RIG: lowering system pre-installed on the ground.
Tyrolean on rope with RIG
RIG uses and specifications
Choice of harness attachment point for the ASAP
Installing a life-line
Using the ASAP and ASAP LOCK when approaching an obstacle or the ground
Using the ASAP and ASAP LOCK in high winds
How to properly adjust your VOLT harness?
How to properly adjust your NEWTON harness?
Video - How to install the seat for VOLT harnesses?
Video - Installing the WIRE STROP
Video - How to install the ASAP/ASAP LOCK on a lifeline?
How and why use a fall-arrest lanyard?
Proper selection of ABSORBICA lanyard – workers weighing 100 to 140 kg (lanyards before 2024)
General principles for work at height
Understanding and optimizing clearance with ABSORBICA-I and Y
Clearance values with ABSORBICA-I and Y depending on your situation
Connecting the MGO to a structure
Using the LADDER CLIMB attachment point on the VOLT harness, European version.
Slinging an anchor with ABSORBICA lanyards
ABSORBICA-Y lanyards and fall-arrest lanyard connector parking on the harness
Oblique or vertical anchors and fall distance with ABSORBICA lanyards.
Tests of ABSORBICA lanyards in a fall over an edge
Strangulation risk in a fall on an ABSORBICA-Y lanyard
Occasional rope ascent with the I'D
Can I use my VERTEX or STRATO helmet without the chinstrap?
ASAP and ASAP LOCK Generations - Compatibility with ASAP’SORBERs
Using the GRILLON as an anchor for more than one person
IP protection index and EMC
Pulley system efficiency tests with MAESTRO, I’D S, PRO TRAXION, ROLLCLIP...
Certification tests of the ABSORBICA-I and Y lanyards
Lowering 150 kg - 250 kg with the I’D S and I’D EVAC on the anchor
Lowering 150 kg - 280 kg with the I’D L on the anchor
Video – Understanding Pulley Efficiency
Video – Connecting a PODIUM or LITEPOD Work Seat to Your Harness
Which type of fall-arrest lanyard to choose?
Brightness or burn time
Managing energy: different approaches
Carabiner compatibility test
Carabiner basics
Choice of carabiner for attaching a descender with a safety gate (I’D S, RIG, STOP...) to the harness
Choice of lanyard end carabiner for a work positioning lanyard
Choice of lanyard-end carabiner for a fall-arrest lanyard
Choice of carabiner for connecting the fall-arrest lanyard to the harness
Choice of carabiners for attaching the rope to the anchor
Choice of carabiners for hauling systems and pulley attachment
Choice of carabiner for connecting a ZILLON or GRILLON lanyard to the harnesss
Examples of dangerous carabiner loading.
Attaching a rope to the harness
Accompanied descent rescue with the RIG and I’D descenders
Haul system with the RIG
Release and rescue of a victim on a fall arrest system, by two co-workers
Rope rescue: accompanied descent with ASAP and ASAP LOCK
Rope rescue: security of the ASAP's hold on the rope
Rope rescue: ASAP performance on a taut rope
Tower rescue: skate block with REEVE
Rescuing a person hanging on an ABSORBICA lanyard
Release and rescue of a co-worker using a rescue kit
Release and rescue of a co-worker suspended on a static support.
Release and rescue of a co-worker suspended on a long rope
Belaying a climber for tower access with the ASAP LOCK
