Passing a rebelay on descent - Petzl Luxembourg
Search

Passing a rebelay on descent

The many rope manipulations involved in caving can waste precious time. Good organization allows for efficient rebelay passage, leaving more time for the activity itself.

Warnings

  • Carefully read the Instructions for Use used in this technical advice before consulting the advice itself. You must have already read and understood the information in the Instructions for Use to be able to understand this supplementary information.
  • Mastering these techniques requires specific training. Work with a professional to confirm your ability to perform these techniques safely and independently before attempting them unsupervised.
  • We provide examples of techniques related to your activity. There may be others that we do not describe here.

1. Tether yourself to the anchor when you arrive at its level.

If both hands are required for clipping in, tie off the STOP in order to free your hand from the brake side of the rope.

Tether yourself to the anchor when you arrive at its level.

2. Descend to transfer your weight onto the lanyard.

Remove the STOP and put it back on the rope below the rebelay.

Descend to transfer your weight onto the lanyard.

3. Take up the slack rope to put your weight on the STOP.

Taking up slack requires a foot support.

Two solutions for slippery or overhanging rock:

- put a knee in the loop of slack above the rebelay (a)

- install a foot loop on the anchor (b)

Take up the slack rope Take up the slack rope 2 Take up the slack rope 3

4. Check the installation.

Remove the lanyard from the anchor

Check the installation.

5. Continue your descent; the rope above the rebelay is free for the rest of the group.

Continue your descent.

Example of a tie-off for short stops:

Example of a tie-off for short stops.