Recovering quickdraws in an overhang while descending - Petzl Luxembourg
Search

Recovering quickdraws in an overhang while descending

It is difficult to clean quickdraws from an overhang. The "cable car technique" allows the climber to conserve energy and avoid doing a pendulum at each draw. The greatest risk of hitting an obstacle comes when approaching the ground. Some solutions for reducing the risks:

Warnings

  • Carefully read the Instructions for Use used in this technical advice before consulting the advice itself. You must have already read and understood the information in the Instructions for Use to be able to understand this supplementary information.
  • Mastering these techniques requires specific training. Work with a professional to confirm your ability to perform these techniques safely and independently before attempting them unsupervised.
  • We provide examples of techniques related to your activity. There may be others that we do not describe here.

1. Descending the route

Once the rope is installed in the anchor, the climber connects a quickdraw to their harness and to the belayer's side of the rope.

This draw allows them to remain close to the quickdraws they are removing.

Once the rope is installed in the anchor, the climber connects a quickdraw to his harness and to the belayer's side of the rope.

At each quickdraw, the climber must unclip the bolt end of the quickdraw.

There are two techniques:

- the climber uses a hold to pull closer to the rock and unclip the quickdraw

- using a dynamic movement while holding the carabiner, the climber moves toward the rock and unclips

Once the draw is unclipped, the climber will pendulum and so the belayer must be well braced.

Once the draw is unclipped, the climber will pendulum and so the belayer must be well braced. Once the draw is unclipped, the climber will pendulum and so the belayer must be well braced.

2. Approaching the ground

The risk of a pendulum is greater when the overhang is bigger.

The risk of a pendulum is greater when the overhang is bigger.

Before removing the last draw, the climber must unclip the "cable car" quickdraw to avoid destabilizing the belayer.


At the last quickdraw, the climber must look behind to see that there are no obstacles in the line of the pendulum.

The risk of a pendulum is greater when the overhang is bigger.

When an obstacle is unavoidable and the quickdraw is recoverable from the ground, the climber may be lowered with the last draw left in place. This technique works if the quickdraw is not too high or difficult to access.

At the last quickdraw, the climber must look behind to see that there are no obstacles in the line of the pendulum.


If the pendulum at the last draw is risky and the bolts are relatively close to one another, the climber can clip into the second-to-last draw.

If the pendulum at the last draw is risky and the bolts are relatively close to one another, the climber can clip into the second-to-last draw. They then unclip the last draw and frees the belayer's rope (draws and "cable car"). The belayer takes up all the slack; the climber grabs onto a hold and unclips their lanyard.