How is lighting performance measured with the ANSI/PLATO FL1 protocol? - Petzl Other
Search

How is lighting performance measured with the ANSI/PLATO FL1 protocol?

Warnings

  • Read the technical notice before viewing the following techniques.
  • It is important to fully understand the information provided in the technical notice before using this complementary information
  • Mastering these techniques requires training.
  • Consult a professional before attempting to perform these techniques on your own.
Brightness (lumens).

Brightness (lumens)

This measurement is taken between 30 and 120 seconds after the headlamp is turned on. It indicates the maximum light output, when the lamp is first turned on, using new batteries.

Lighting distance (meters).

Lighting distance (meters)

This is the maximum distance between the lamp and the location where only 0.25 lux of illumination remains. The measurement is taken when the lamp is turned on, using new batteries. Lighting distance depends directly on brightness, but mainly on the shape of the beam.

Burn time (hours).

Burn time (hours)

This corresponds to the length of time for which lighting remains optimal, from when the lamp is turned on, until 10% of maximum light output is reached. Then it switches to reserve lighting.

Reserve lighting.

Reserve lighting

Reserve lighting ensures a minimum light level for walking. However, the light may not be sufficient for fast paced activities (such as running, mountain biking, skiing...).

Example of a light output curve.

Example of a light output curve for a STANDARD LIGHTING headlamp.