Rope rescue: security of the ASAP's hold on the rope
- Read the technical notice before viewing the following techniques.
- It is important to fully understand the information provided in the technical notice before using this complementary information
- Mastering these techniques requires training.
- Consult a professional before attempting to perform these techniques on your own.
When a victim is hanging on his/her ASAP (locked by a fall), if the ASAP's rope is the only solution, the rescuer uses it to access the victim.
Do the stresses put on the rope by the rescuer have an effect on the victim's ASAP?
100 kg mannequin suspended from an ASAP + ABSORBICA L57 on a 10.5 mm PARALLEL rope.
A 100 kg rescuer does a jerky ascent on the victim's rope and simulates falls, sudden tensioning...
Test done at 12 m, then 1 m from the anchor.
No slippage or unlocking of the ASAP observed.
If the victim has taken a fall, his/her fall arrest system must not be used anymore. The rescuer ascending on the same rope must therefore be viewed as a last resort.
If a worker is susceptible to falling on an ASAP without having a work rope, a rapid rescue / evacuation system must be considered in advance.