RAD SYSTEM preparation, depending on the anticipated situation
Basic Techniques
The RAD SYSTEM allows getting out of various tricky situations. Depending on the plan for the day, it is easy to anticipate difficulties that may be encountered, and to best prepare the kit.
Warning
- Carefully read the Instructions for Use referenced in this Tech Tip before reading the Tech Tip itself. You must have read and understood the Instructions for Use to understand this supplementary information.
- Performing these techniques requires specific training. Work with a professional to confirm your ability to perform these techniques safely and independently before attempting them unsupervised.
- We provide examples of techniques related to your activity. Other techniques not described here may also exist.
1. Ski descent with the possibility of a rappel
Arriving at the top of a steep section that requires a rappel is normally not an emergency situation; the cord can be stored in the pack or carried on the harness.
2. Unroped glacier travel with crevasse fall risk
If a skier falls into a crevasse, you must be able to quickly send him a rope with a carabiner, so that he can easily attach himself. Having the cord and the knot prepared saves precious time. The ascenders should also be ready on the harness.
3. Roped glacier travel
As with any travel in a crevassed area, the rope length between teammates must be adjusted according to the situation. Each teammate must have reserve rope on himself to be able to set up a haul system, and the ascenders must be ready on the harness to be deployed even with the rope under tension and while holding the weight of a teammate.
Packed in kit and clipped to harness
Chest loops
Packed in kit and stowed in the pack
