New
VOLT® WIND European Version
Comfortable fall-arrest and work positioning harness for wind turbine technicians with attachment point for progression along a vertical rail or cable-based fall protection system. 5 attachment points
The VOLT WIND is a fall-arrest and work positioning harness with five attachment points, specifically designed for wind turbine technicians. FAST opening buckles make it easy to don with both feet on the ground and DOUBLEBACK self-locking buckles allow for quick adjustment. It is designed to be comfortable, adjustable, and supportive for work at height. The LADDER CLIMB ventral attachment point can be used to connect a trolley and easily and comfortably move along a rail or cable-based fall protection system. Protective plates on the back of the shoulder straps and waistbelt help shield the webbing from friction-induced wear when moving inside a wind turbine tower. Equipment loops and tool holder slots allow the user to organize and carry all the equipment needed for the job at hand.
Reference: C072BB00
Features
Donning with feet on the ground
FAST opening buckles on the waistbelt and leg loops make it possible to quickly don the harness with feet on the ground.
LADDER CLIMB attachment point
The VOLT WIND is equipped with a LADDER CLIMB attachment point for progression along a vertical rail or cable-based fall protection system.
Comfortable
All contact zones use contoured foam and are lined with breathable material, including the shoulder straps, waistbelt and leg loops, making it more comfortable to work and move around.
Protective plates
The VOLT WIND features reinforced webbing protection in the rear for when the user is moving inside a wind turbine tower.
Product Video(s)
- The VOLT WIND features protective plates on the back of the shoulder straps and waistbelt to limit wear on the webbing and provide comfort when moving inside a wind turbine tower
- Quick donning and easy adjustments that don’t slip:
- Dons quickly with both feet on the ground
- Waistbelt, sternal point, and leg loops are equipped with FAST opening buckles for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves
- Adjusting the harness is convenient and easy, with DOUBLEBACK self-locking buckles on the shoulder straps and waistbelt
- Anti-slip devices installed on the DOUBLEBACK buckles help maintain the desired adjustment throughout the workday Comfortable construction and optimized adjustment system:
- Widely spaced shoulder straps reduce neck chafing
- All contact zones use contoured foam and are lined with breathable material, including the shoulder straps, waistbelt and leg loops, making it more comfortable to work and move around
- Thin sliding dorsal straps are adjustable, providing more ease of movement and adapting to different body sizes
- Adjustable strap between the dorsal plate and waistbelt allows the harness to be properly positioned
- Semi-rigid waistbelt and leg loops provide optimal support
- Leg loop foam can be repositioned for the perfect fit
- Elasticated leg loop bands (can be replaced by the user, available as spare parts) allow the harness to maintain proper adjustment whether the user is walking or suspended
- LADDER CLIMB ventral attachment point:
- For progression along a vertical rail or cable-based fall protection system, allows for ventral attachment of the trolley for better load distribution on the waistbelt
- In the event of a fall, the attachment point automatically moves upward to a sternal position, allowing a vertical post-fall body position
- Practical:
- Two side attachment points can be folded down to prevent them from snagging accidentally when not in use
- Shoulder straps are equipped with a lanyard parking system for MGO connectors
- Waistbelt features 2 equipment loops and 2 slots for CARITOOL holder and TOOLBAG pouch to easily organize equipment for the workday
- Eco-friendly design: textile components contain at least 55% recycled materials, equivalent to about 30% of the total weight of the harness (this calculation was done using the harness that best represents the VOLT range)
- LADDER CLIMB ventral attachment point: Attachment for a positioning lanyard in single mode, a descender, or a fall-arrest trolley
- Lateral attachment points
- Attachment for a positioning lanyard for use in double mode
- Sternal attachment point
- Attachment for a fall-arrest system
- Ventral attachment point
- Attachment for a fall-arrest system
- Rear attachment point on the waistbelt
- Attachment for a restraint lanyard
- Certification(s)
- CE EN 361, CE EN 358, CE EN 813
- Material(s)
- Nylon, polyester, aluminum, steel
| SKUs | C072BB00current product | C072BB01 | C072BB02 |
|---|---|---|---|
| Color(s) | Black, Yellow | Black, Yellow | Black, Yellow |
| Size | 0 | 1 | 2 |
| Waist belt | 65-80 cm | 70-93 cm | 83-120 cm |
| Leg loops | 44-59 cm | 47-62 cm | 50-65 cm |
| Stature | 160-180 cm | 165-185 cm | 175-200 cm |
| Weight | 1980 g | 2045 g | 2115 g |
| Made in | FR | FR | FR |
| Guarantee | 3 years | 3 years | 3 years |
| Inner Pack Count | 1 | 1 | 1 |
| Quantity Per Box | 3 | 3 | 3 |
| EAN | 3342540854109 | 3342540854215 | 3342540854222 |
For your safety, it is essential that you read and strictly follow the Instructions for Use and all Petzl technical information. If you have any questions or concerns, please contact us.
Instructions for Use
Declaration of Conformity
Easily manage and inspect your PPE
- Add a Petzl product by simply scanning its datamatrix: all information related to the product will automatically populate
- Easily import and export your existing PPE data
- View product history from the date of manufacture
Learn More About Your Product
VOLT® WIND European Version Spare Parts
Pro universe
Pro universe
Spare Parts
Kit for FAST TL Buckle Cover 28 mm
Kit for FAST TL Buckle Cover 28 mm
Replacement kit for the FAST 28 mm triple action buckle
Pro universe
Spare Parts
Our Services
- Responsive Customer Support
- Wide Range of Spare Parts
- Training from Petzl Solutions
- ePPEcentre — The PPE Management App
VOLT® WIND European Version Accessories
Products Related to the VOLT® WIND European Version
ABSORBICA®-Y MGO European Version
ABSORBICA®-Y MGO European Version
Double lanyard with integrated energy absorber and MGO connectors
Pro universe
Pro universe
New
