Elongation - Petzl USA
Search

Elongation

Two types of elongation are measured in the standard testing.

Warnings

  • Read the technical notice before viewing the following techniques.
  • It is important to fully understand the information provided in the technical notice before using this complementary information
  • Mastering these techniques requires training.
  • Consult a professional before attempting to perform these techniques on your own.

Static elongation

Static elongation is the amount of rope stretch under an 80 kg load. The test is done on one strand for single and half rope, two strands for twin rope.

It is limited to:

  • 10 % for single ropes (one strand of rope)
  • 12 % for half ropes (one strand of rope)
  • 10 % for twin ropes (two strands of rope)

In use, static elongation is important mainly in a slingshot top rope situation. When working a route, less stretch can be more convenient, to avoid finding yourself below the spot you want to work!

A low static elongation also helps avoid ground falls at the start of the climb.

Dynamic elongation

Dynamic elongation is the amount of rope stretch produced by the standard dynamic test. It must be less than 40%. As this test is extreme, it should be assumed that this is the maximum elongation. This maximum value will always be less in the field.

For a climbing fall, the dynamic elongation of the rope is between 10 and 40%.

A large dynamic elongation increases the risk of falling to the ground or on a ledge.

For a climbing fall, the dynamic elongation of the rope is between 10 and 40%.