The ABSORBICA-I and Y lanyards are designed for users weighing 50 to 130 kg
The special progressive construction, adapted to weight, reduces the severity of falls.
- Read the technical notice before viewing the following techniques.
- It is important to fully understand the information provided in the technical notice before using this complementary information
- Mastering these techniques requires training.
- Consult a professional before attempting to perform these techniques on your own.
To cushion a fall, all tearing energy absorbers use the successive breaking of multiple woven fibers linking the tear strap. The strength of these woven fibers regulates the impact force that the user is subjected to.
On tearing energy absorbers without progressive construction, the strength of the woven fibers is identical at every point on the energy absorber; all falls are arrested with the same impact force.
The ABSORBICA-I and Y have a special progressive construction: the woven fibers are weaker at the start of the tear strap, and stronger at the end.
The impact force is lower if the fall energy is lower (light weight user and/or short fall).
The maximum impact force of 6 kN is only reached in significant falls (heavy user and/or long fall).
The progressive construction increases the progressiveness of fall arrest and reduces the severity for the user:
Example of a 100 kg user falling 2 m : with ABSORBICA-I or Y, the arrest distance is longer, with better absorption and a lower impact force.
With a non-progressive absorber (calibrated for 6 kN maximum)
With ABSORBICA-I or Y (2016 models and after)
Fall arrest examples with ABSORBICA-I and Y for users weighing 50, 100 and 130 kg:
The more energy in a fall, the longer the tear length; the more stages are activated, the higher the impact force.
- General principles for work at height
- The ABSORBICA-I and Y lanyards are designed for users weighing 50 to 130 kg
- Understanding and optimizing clearance with ABSORBICA I and Y
- Clearance values with ABSORBICA-I and Y depending on your situation
- Connecting the MGO to a structure
- Using the LADDER CLIMB attachment point on the VOLT harness
- Carabiner basics
- Choice of carabiner for attaching a descender with a safety gate (I’D S, RIG, STOP...) to the harness
- Choice of lanyard end carabiner for a work positioning lanyard
- Choice of lanyard end carabiner for a fall arrest lanyard
- Choice of carabiner for connecting a fall arrest device to the harness
- Choice of carabiners for attaching the rope to the anchor
- Choice of carabiners for hauling systems and pulley attachment
- Choice of carabiner for connecting a ZILLON or GRILLON lanyard to the harnesss
- Examples of dangerous carabiner loading.
- Attaching a rope to the harness
- Slinging an anchor with ABSORBICA I and Y lanyards
- ABSORBICA Y lanyards and fall arrest lanyard connector holders on the harness.
- Oblique or vertical anchors and fall distance with ABSORBICA lanyards.
- Tests of ABSORBICA lanyards in a fall over an edge
- Using two ABSORBICA I lanyards in parallel: DANGER
- Strangulation risk in a fall on an ABSORBICA Y lanyard.