Unblocking a rope that is jammed behind the cam
Product Information and Specifications
Warning
- Carefully read the Instructions for Use referenced in this Tech Tip before reading the Tech Tip itself. You must have read and understood the Instructions for Use to understand this supplementary information.
- Performing these techniques requires specific training. Work with a professional to confirm your ability to perform these techniques safely and independently before attempting them unsupervised.
- We provide examples of techniques related to your activity. Other techniques not described here may also exist.
In certain specific cases (for example, assisting the climber in regaining a high point after a fall, GRIGRI fixed on a carabiner attached to two points, rope climbing...), the rope can become jammed behind the cam. Don't worry: this jamming does not damage the rope. Our internal testing shows that even with the smallest diameters, the rope remains intact, even if the climber falls. Note also that even with the rope in this position, the cam functions normally and the climber's fall will be arrested.
Unjamming the rope is simple. Always hold the brake side of the rope when performing this action. If the rope is not under tension, push on the side of the device to reposition the climber side of the rope in the cam groove. If the rope is already under tension, simply pull on the brake side of the rope.
Initial state: the rope is jammed.
Unjamming, if the climber side of the rope is under tension: pull on the brake side of the rope.
Initial state: the rope is jammed.
Unjamming, if the climber side of the rope is not under tension: push on the device to reposition the climber side of the rope in the cam groove