Using the ADJUST rope adjuster with the MGO OPEN - Petzl Finland
Search

Using the ADJUST rope adjuster with the MGO OPEN

For attachment to a large diameter anchor, the MGO OPEN may be used with the ADJUST rope adjuster from a PROGRESS ADJUST or LEZARD lanyard.

Warnings

  • Carefully read the Instructions for Use used in this technical advice before consulting the advice itself. You must have already read and understood the information in the Instructions for Use to be able to understand this supplementary information.
  • Mastering these techniques requires specific training. Work with a professional to confirm your ability to perform these techniques safely and independently before attempting them unsupervised.
  • We provide examples of techniques related to your activity. There may be others that we do not describe here.

Preparation:

Install the rope adjuster on the MGO OPEN. WARNING: place the MGO OPEN correctly with regard to the arrow engraved on the rope adjuster.

The opening on the MGO OPEN does not permit a simple insertion of the rope adjuster, here is a suggestion to facilitate the attachment.

- Tighten the screw on the MGO OPEN by following the directions in its Instructions for Use.

- Tighten the screw on the MGO OPEN by following the directions in its Instructions for Use 1/2
- Tighten the screw on the MGO OPEN by following the directions in its Instructions for Use 1/2
- Tighten the screw on the MGO OPEN by following the directions in its Instructions for Use 2/2
- Tighten the screw on the MGO OPEN by following the directions in its Instructions for Use 2/2

Poor positioning that prevents locking:

When connecting to an anchor, or if the lanyard was slack for a moment, check the position of the rope adjuster in the MGO OPEN. To function, the rope adjuster must be able to rotate freely.

WARNING: a poorly positioned rope adjuster can jam in a position that prevents locking, presenting a fall risk for the user.

Poor positioning that prevents locking
Poor positioning that prevents locking